RAK green power module mounting plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This allows you to screw the RAK green power board to the inserts found in many weather proof enclosures.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 34
- Makes
- 1
- Views
- 260
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Note, with my board the mounting holes were slightly smaller than those found on the main wisblock, so you'll need to use smaller screws than the ones supplied. Alternatively, you can drill out the existing 4 holes on the GPM to 2.5mm, but only do this if you are sure you won't damage the board.
Make sure there is no electrical contact between the mounting screw and the board, some of the pins do protrude and I had to trim mine.
v1 is a tight fit, I've spaced the holes slightly wider for v2, but it is untested