1 / 5
Guide for cutting 1 inch shades
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Helpful tool for straight cut of 1 inch cellular and honeycomb shades
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 87
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Introduction and Use Case
I ordered 1 inch cellular shades that were a bit too wide so needed to cut them. I removed the shades from their casing and placed them in this guide so I could make an accurate perpendicular cut.
Printing
I used PETG with 0.2mm levels. Very simple print.
Instructions for Use
Place the shades into the cutting guide as shown below measured to the cut point Use a very sharp knife or box cutter to evenly trim the shades.
