1 / 2
GT3 CUTTING JIG
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Help to evenly cut GT3/GT2 to equal length for AB belt and z belt on the Voron 2.4. some different versions.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 25
- Makes
- 0
- Views
- 185
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
print one of zbeltstart and abstart. cut your belt cleanly and insert both at the same point. ! Start the center piece next to the start with roughly one tough between the blocks. Measure it first with all the blocks on, move one of the center pieces keeping it roughly one tooth to the block furthest from the start! it'll take a second but you should be able to get a fairly clean cut!
Standard naming should be good up to 12mm belt wise, short should be closer to 3mm.