1 / 4
Screwbox and measurement tool
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Measures M2-M12 and 4mm-50mm
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 21
- Makes
- 0
- Views
- 203
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Instructions:
Print out the Box, the Lock and decide between the Lid with or without the measurement tool. For the hinges I used steel wire push rods but you can also just use some filament.
Printing:
Box.stl:
- 0,2mm Layer Height (for faster printing)
- 3 Walls
- 15% infill
- support on
Lock.stl:
- 0,15mm Layer Height
- 3 Walls
- 15% Infill
- support off
Lid(with or without measurement tool):
- 0,2mm Layer Height (for faster printing)
- 3 Walls
- 15% infill
- support off
- (with measurement tool):
- You might want to print the upper 6 layers in a different color for better looks.
- You might want to print the upper 6 layers in a different color for better looks.
I used PLA for all prints.
Happy printing!!