Inverted Ender3 V3 SE ESP32 Camera Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Andreas Otto's ESP32 camera case with inverted mount, prints without support.
- Rating
- 0 / 5
- Likes
- 33
- Downloads
- 152
- Makes
- 1
- Views
- 817
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
I started with Andreas Otto's ESP32 camera case, and moved the mount so the USB port will be facing down, when mounted to the Ender 3 V3 printer. I moved the mount flush with the front of the camera case, so it now prints without any supports. Once mounted, it sits a little further from the hot end of the printer, with more clearance.
I also opened holes on the sides, to allow access to the buttons on the side of the module without removing it from the case. Also updated the printer clip, to combine the straight and offset versions, and added depth so it can accept fully counter-sunk socket head cap screws. It's mounted in the offset position in the pics.
I printed at 0.2mm layer height, 4 top and bottom layers, 3 walls, and 20% infill, using Inland Tough PLA. The printer clip prints with supports, but the other parts print without supports.