1 / 2
Non-damaging 3 pin base plate for Ikea Platsa cabinet — image 1
1 / 2

Non-damaging 3 pin base plate for Ikea Platsa cabinet

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a simple non-damaging base plate for Ikea Platsa to add your own accessories to the cabinet.

Rating
5 / 5
Likes
20
Downloads
121
Makes
3
Views
1,050
Reviews
4

Updated at source:

Model information

Category
Accessories
License
GNU General Public License v2.0

This is a simple non-damaging base plate for Ikea Platsa to be able to design your own accessories for the cabinet (e.g. thermometer, hygrometer, cam, tool holder, …).
 
Here is a holder for a ThermoPro TP50 that can be glued to this non-damaging base plate.

I was bored that most of the Ikea Platsa accessory holders are made for screwing them into the cabinet. When now adding and removing the accessory holders several times, the used holes will no longer hold the accessories and you have to use thicker screws. This is the reason why I have designed a non-damaging base plate that can easily be inserted with 3 pins into the row of holes.

I have attached the original FreeCAD (I am using 0.19) source file (Non-damaging 3 pin base plate for Platsa.FCStd) so you can add your specific accessory holders or just create / print your required accessory holder and glue your holder to my non-damaging base plate. I recommend to use UHU Plast special glue.

 

In case you are using my base plate to design your own accessory holder(s), please share a make with a link to your design.



Print Instructions:

No supports required

0,2mm (Quality)

PLA (or other filament types)

30% infill (in case of "heavy" accessories I recommend to increase the amount of infill)

Tags