Front Endoscope Camera Mount for Prusa Mini
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An endoscope camera mount for the Prusa Mini.
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 37
- Makes
- 0
- Views
- 375
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v2.0
Add a nozzle camera using a Endoscope (Borescope) camera!
I found that the original endoscope mount (https://www.printables.com/model/63283-prusa-mini-endoscope-mount) was hitting the back screws of the build plate, moving the nozzle fan out of the x-carriage piece. Also, I didn't want to have the camera pointed to the front (where it would capture people passing by), so I built a holder that points towards the back of the printer.
This piece replaces the original M.I.N.D.A./SuperPINDA holder piece. You will need a M3 nut (which can be taken from the original piece) as well as the original screws.
I'm using a 8mm endoscope camera, which fits nicely in the holder. There is a M3 slot at the top to have a M3 screw that should make it compatible with smaller cameras as well.
My print settings:
- Material: PETG
- Layer height: 0.3mm
- Infill: 100% (probably less infill is fine)
After replacing the piece, make sure you set up the M.I.N.D.A./SuperPINDA sensor again: https://help.prusa3d.com/guide/height-adjustment-of-m-i-n-d-a-superpinda-sensor-mini-_154547