Bed Leveling Thumb Nut - TRONXY P802
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Thumb nuts for bed leveling screws. Made as large as possible to accommodate large hands in tight spaces. Use M3 hex…
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 62
- Makes
- 0
- Views
- 398
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Thumb nuts for bed leveling screws. Made as large as possible to accommodate large hands in tight spaces.
Use M3 hex nut... hex fits snug in PLA
Designed around TronXY P802E... Will probably fit other similar printers
UPDATE: 3/9/2017 - I suggest to anyone going to print these... use ABS or other that can withstand higher temps. I had originally printed these in PLA, after several uses I have noticed that the heat transferred from the the hot bed, through the screw and into the nut has actually melted the PLA slightly. If you only print PLA or other plastics that only require very low temps it may not be an issue. I suspect the melting happened during my attempts to print ABS when the bed temps need to be 100+.
Print Settings
Printer:
TronXY P802E
Rafts:
No
No
Resolution:
medium
50
Notes:
print with hex up
Category: 3D Printer Parts