Key holder key + CAD
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.72 – €0.88 net (excluding VAT)
For file: key_holder_1_0.25mm_PLA_MINI_48m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.80 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 48 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A key to organize your keys. Supportless print!
- Rating
- 4.778 / 5
- Likes
- 91
- Downloads
- 928
- Makes
- 10
- Views
- 3,614
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A key holder with 2 screws holes to fix it to a wall.
PLA, Generic 0.25mm Draft mode profile in Prusaslicer
Model aligned at 45 degrees on the bed fo straight solid infill lines. This allows to to use the default infill direction using X and Y motors to do the infill without even changing the parameters of the infill direction. It is easier on the machine et let a better looking edges even if your filament properties are not exactly on point.
2.450mm height for the core to be strong enough and with a perfect profile fit as the first layer is 0.2mm and all the others are 0.25mm. The natch in the key is exactly at 1.95mm so it is extacly 2 layer less than the main core so all the solid infill lines will be aligned at the end of the print for a better finish. All the edges are a little rounded to avoid sharp edges