BMW N5X Oil Funnel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed to fit & lock in the BMW N5X motor oil filler.
- Rating
- 5 / 5
- Likes
- 47
- Downloads
- 460
- Makes
- 1
- Views
- 2,288
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Share Alike
Use case:
I found it rather annoying and hard to not make a spill while adding oil to my Z4 with the N54TU engine. There's not enough room to maneuver an oil container without making a small spill.
This should help resolve this issue. I added inserts and a rim to fit in the oil fill. This should keep the funnel stable while adding oil during oil changes. I also added a rim on top of the funnel to effectively reduce spill-backs.
Funnel measurements:
Funnel entry diameter: 123mm OD / 110mm ID
Funnel exit diameter: 38mm
Insert to insert distance: 51mm
Print information:
Printed through a 0.04mm nozzle on an Elegoo Neptune 4 using PLA+. Your results may vary, but I highly recommend you ensure your printer is calibrated for best results.
Material Recommendation: Print it with PETG for elevated chemical resistance.
Total Print Time: 4hrs @ 350mm/s with a 17mm^3 of flow.
Print setting recommendations:
- Print upside down
- Layer Height: 0.25
- First/Initial layer: 0.22
- Walls: 2 walls, alternating (to save print time and filament)
- Top/Bottom: 3 each, Monotonic
- Infill: 15%, Gyroid
- Solid Infill: Monotonic
- Support: Tree/Organic
- Untick “On build plate only” or equivalent option in your Slicer