Voron Revo Nozzle Storage
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These modules fit into the Voron skirt to store your Revo nozzles. Designed for Trident and v2.4.
- Rating
- 4.5 / 5
- Likes
- 16
- Downloads
- 118
- Makes
- 3
- Views
- 587
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Storage for your Revo nozzles! These individual modules fit snuggly into the “honeycomb” skirt on any Voron. It has a latch mechanism to retain the nozzle so it does't fall out.
Printing
These can be printed all at once in the same color with no supports. I chose to print them in a color matching the nozzle (0.25: yellow, 0.4: red, 0.6: blue, 0.8: green) with a color change to a contrasting color upon the first full layer after the numbers.
Post Processing
After printing, use a file to adjust the two bumps on the tops side of the module until you get a snug fit. I found tolerances tight enough that I all but removed them entirely.
Test the fit of the nozzle before inserting the module into the printer skirt. You should be able to easily click it in and pull it out. Adjust the retaining bump with a file to get the best fit.
When installing into the printer, take care not to block ventilation or interfere with fans, electrical, etc.
These may event work in the Switchwire, though space is a bit tight.