1 / 4
1U 19" Adapter for 4040 Aluminium Extrusion
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
made for heat-set threaded inserts
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 26
- Makes
- 0
- Views
- 264
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
Idea
An adapter to mount a 1U-sized 19" power strip to a desk/holder/setup. All the strips I've seen so far have the power cord exiting directly in the middle of one side, so that has to be taken into account.
To print
I used PETG with 4 perimeters to optimize strength, otherwise standard settings.
To assemble (per side)
- 2x M6 heat-set inserts (dimensions are for Ruthex, CNCKitchen)
- 2x M6x12mm ISO 7380 screws to mount the power strip to the adapter
- 1x M5x12 ISO 7380 screw to mount the adapter to the rail
- an appropriate T-nut for your profile
Notes
I had good success with the build, but YMMV, especially with other profiles. I used M5 for mounting to the rail because that's what I have readily available.