PrintAirPipe – Printable pipe system – complete set by Nerdiy.de
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The PrintAirPipe System is a 3D printable modular pipe system that is based on different pipe segments.
- Rating
- 4.667 / 5
- Likes
- 935
- Makes
- 3
- Views
- 27,816
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Standard Digital File License
The PrintAirPipe System is a 3D printable pipe system. Using the different pipe segments, an individual and customizable exhaust or supply air system can be set up. Ideal for conveying the exhaust air from a soldering station, 3D printer or similar to a suitable filter system or wall outlet.
The PrintAirPipe system consists of different segments that can be individually connected to each other.
UPDATE 09.06.24:
I added several new segments to the complete set. As soon as I have more slots to sell items here I will also offer some segments as a standalone product. Meanwhile you can find seperate segments at Nerdiy.de/papp.
There are currently the following segments:
- AirFlowSensor Segment (Added 09.06.24)
- 360° intake segment (Added 09.06.24)
- Air Sensor Segment (Added 09.06.24)
- Inch Adapter Set (Added 09.06.24)
- 50mm Pipe segment set (Not included in this set yet)
- Servo Valve
- Flange segment
- Butterfly valve segment
- 120mm fan insert
- Filter segment
- Adapter to 100mm PrintAirPipe standard
- Adapter to 80mm PrintAirPipe standard
- Adapter to 50mm PrintAirPipe standard
- 90° connector
- 45° connector
- 22.5° connector
- Y-distributor segment
- Y-distributor straight segment
- Extension 50mm
- Extension 100mm
- Extension 150mm
- Extension 200mm
- Cover cap
Interested in a single segment only?
See all available segments here: https://nerdiy.de/papp
Interested in a smaller pipe diameter?
There is now a 50mm version available here: https://www.printables.com/de/model/921501-printairpipe-50mm-pipe-system-complete-set
Looking for ESPHome/Firmware configurations?
See all available configurations here: https://github.com/Nerdiyde/ESPHomeSnippets/tree/main/Snippets/PrintAirPipe
Material List (Affiliate-links):
