1 / 2
Canton Smart Soundbar 10 Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Custom parts to mount your Canton Smart Soundbar 10 to your TV using a standard 20x20mm aluminum profile.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 149
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Noncommercial
This is for those who have their TV on a full-motion wall mount and want the soundbar mounted below and moving with it. Since I wasn't able to find a commercial solution fitting the rather widely spaced mounting holes on the Canton Smart Soundbar 10, I designed my own.
In addition to the 3D-printed parts, you'll need the following:
- 90cm long standard aluminum profile (20x20mm)
- A pair of right-angled mounting brackets to attach the profile to the VESA mounting points on the TV (e.g. Vogel's 1250)
- T-nuts and screws:
- 2x M4 for the 3D-printed carriages
- 4x M5 or M6 for the right-angeled steel brackets
- Threaded inserts and screws for the 3D-printed parts:
- 4x M3 for the two carriages
- 2x M4 (short version) for the two brackets
How to assemble:
- Mount the two right-angled brackets underneath your existing VESA mount on the lower two fastening points (maintain about 6cm of clearing at the bottom).
- Mount the aluminum profile to the brackets using 2 t-nuts each
- Attach the 3D-printed brackets to the carriages and slide them over the aluminum profile
- Mount the soundbar onto the brackets
- Fix the carriages in position using 1 t-nut each
How to print:
- I opted for PC-CF filament for maximum stability and rigidity
- Make sure to maintain the orientation of the STLs (you'll want the weight pulling along the printed layers, not between them)
- My print settings:
- 0.2mm layer height
- 4 perimeters
- 30% Gyroid infill