Modular Enclosure for every 3D-Printer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modular Enclosure for every 3D-Printer.
- Rating
- 5 / 5
- Likes
- 531
- Downloads
- 1,384
- Makes
- 2
- Views
- 8,637
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
I was searching for a moduluar Enclosure. Some of the designs i found looked really nice but they needed so much filament.
So i designed my own enclosure and i am really happy with it.
You need a lot of M3x12mm and 16mm screws with nuts.
10x2mm magnets for the door and a 50mm or longer M3 Screw for the hinge.
I used a 6mm Acrylglass sheets for the sides, top and backside.
For the door you need a 4mm sheet.
You can print the frame with some extra holes for some struts to get more stability, or mout some stuff on the struts (camera,…).
In my case i printed the enclosure with the holes for the struts but i didnt mounted them cause the enclosure was really stabil.
The handle on the door is not from me, found it here on printables.