1 / 6
Awesome Spring Carabiner - No Supports
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Body is best printed with PETG with a 60%-80% infill.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 70
- Makes
- 1
- Views
- 308
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- GNU General Public License v2.0
Body is best printed with PETG with a 60%-80% infill.
Spring arm must be PLA with an infill of 80-90% layer height 0.1-0.15mm.
(Cannot use PETG for spring arm. IT's too flexible)
Arm must be with PLA for a good tight snapping arm. Different PLA filaments work better for some reason. If you're not getting the tight spring return, try a different filament.