Low profile Air Assist Nozzle for Ortur Master 2 20W 2021 fixed focus laser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I saw plenty designs for an air-assist nozzle. None of them have the nozzle so low that it also shields the laser from…
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 60
- Makes
- 0
- Views
- 511
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
I saw plenty designs for an air-assist nozzle.
None of them have the nozzle so low that it also shields the laser from your eyes.
I ASSUME this will be a lot safer for your eyes when you are working with it turned on in the room.
I still advise to use protective glasses when looking directly at it
Disclaimer: USE AT YOUR OWN RISK. Lasers are cool but can harm you.
I have the 2021 20W fixed focus Ortur Laser Master 2, which has a positioning block to set the correct focus. This nozzle is designed to replace that 30mm focus block; I designed it to be 28mm when inserted fully onto the laser.
Designed at a little over 12mm for a snug fit; you might need to sand a bit.
Air assist opening assumes a 6mm outer diameter tube.
Be sure to test if you have enough airflow before starting a cut.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Doesn't Matter
Supports:
Yes
0.2
Infill:
15%
Filament:
eSun PLA+ White
Notes:
I suggest printing upside down using NO support and placing a custom support block under the main nozzle.
See last photo (bottom view)Else you will get support in the air-hose opening, which you cannot remove.
Cura has a great plugin for this (Custom Supports, by Krasimir Stefanov)
Category: DIY