Nalgene Funnel for Ice Machine with Magnets
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.65 – €3.24 net (excluding VAT)
For file: Nalgene Funnel WM_0.4n_0.2mm_PETG_XL_2h55m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.94 excluding VAT (range midpoint).
- Weight reported by the author
- 40 g
- Print time reported by the author
- 2.92 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Funnel for use of Nalgene wide mouth bottles with a refrigerator ice machine, with magnets to store on the fridge
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 28
- Makes
- 0
- Views
- 196
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
I take my Nalgene Silo water bottle to work every day, and I fill it up with ice then water in the morning. Unfortunately, the 48 ounce bottle is too big to neatly fit under the 80mm diameter ice shoot, so I designed this funnel to keep my fingers from getting frozen first thing in the morning. I did a remix of the original model to let me store it on the door of the fridge above the ice maker.
I used Overture PETG with Prusament PETG settings with 0.20 Quality and a 0.40mm nozzle. Be sure to place the large mouth of the funnel face down on the build plate and no supports should be required. I used Loctite Gel Control super glue with magnets of 8mm diameter and 1.65 thickness.
For the original funnel without magnets, see here: https://www.printables.com/model/845091-nalgene-funnel-for-ice-machine
Disclaimer that technically this isn't foodsafe, and if you're really concerned, you should consider the use of a food safe epoxy to coat this. Since it's PETG, you could toss it in the dishwasher, but due to the crevices from FDM, you aren't likely to get everything. Also, the dishwasher may shorten the life of the superglue to hold the magnets in. I don't use foodsafe epoxy on mine, but I also drink way too much diet soda to worry about this funnel.