Kyria closed case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Kyria rev 3 closed case for choc hot-swap switches
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 73
- Makes
- 0
- Views
- 745
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a minimalistic-looking case for my Kyria rev 3, my main goals were keeping it as “unobtrusive” as possible as this is for my office keyboard, and have it closed so that as little dust as possible can get in there.
Most cases I see have a plate and the enclosing part is in the bottom, I wanted to try the reverse as I hope it makes it less prone to dust getting in, as my office is a very dusty place.
This fits hot-swap choc switches, no idea how it might fare with other stuff.
I use no OLED so I wanted that part covered and as closed as possible, but there are still holes to make cable ports and reset switches accessible of course. The cover is separate so if you have OLED just don't print that part and use an OLED cover instead.
Can be easily assembled with spacers and screws from the Kyria hardware kit.
The caps on it are the ones I designed for my Elora:
https://www.printables.com/model/727400-kailh-choc-keycaps-elora
Sorry if the pic is not very good, was not thinking of uploading this, and the keyboard lives in the office now so can't take more pics atm.