Counting matching models…
A handwired version of the kyria keyboard by splitkb.com A split ergonomic keyboard with 50 keys and a columnar layout. I printed at 0.2mm on an ender 3 max with 999 top layers to make it solid. Github:…
This case is designed around the Kyria split, ergonomic keyboard . It requires that you purchase the “plate case” offered from SplitKB as those plates are used to sandwich this case between them. Also included, and optionally printed, is…
3D Printed Case for the Kyria Split keyboard Case files are included for the left and right cases. The right case comes with a variant with and without the Kyria "Sigil" logo. Update July 1st 2020 Plate file has been updated to correct…
For 40mm flat overlay. Flat response is easier to use without spending a lot of effort to tune hover. Bigger active area is also easier to find since the curved overlay had thick inactive areas around the outer perimeter. I found 3x…
This is a 1:48 scale model of the Edelweiss tank from the series Valkyria Chronicles. I made this model to paint and display it, it has no moving parts except for the turret if you decide not to glue it. You might need to sand some parts…
A really low profile Kyria Case for Choc hotswap PCB's. Bottom plates with cutouts for hotswap sockets. Top plate is 1.2mm and has a 0.8mm mid layer to make the plate sit flush against the PCB which eases removing and inserting switches.…
These faceplates are designed to replace your top plate if you want to change the colour over the stock top plates. Print this with at least 75% infill, preferably 100% infill. Enable ironing or print with a satin sheet for a nice top…
This holds a 35mm Cirque circle trackpad with curved overlay on the right side of a Kyria keyboard, replacing the acrylic case guard. Instead of going through a FFC, I simply wired to the pads originally meant for OLED. On the trackpad,…
I wanted a minimalistic-looking case for my Kyria rev 3, my main goals were keeping it as “unobtrusive” as possible as this is for my office keyboard, and have it closed so that as little dust as possible can get in there. Most cases I…
This is a kyria case based on Coumbaya's Corne case. It's designed around the acrylic plate case from splitkb just replace the backplate with this case and you're all set! Coumbaya's case can be found here .
Simple high profile case for the kyria. Requires the same hardware as the [acrylic version](https://splitkb.com/collections/cases-and-plates/products/kyria-acrylic-high-profile-case) found on splitkb. It also reuses the acrylic OLED…
I wanted to try tenting my Kyria keyboard, and found other solutions too combersome, so I made this quick and easy tenting clip, that fits with friction. You simply press it on the bottom plate, and sits nice and snug. For best results,…
This case fits a full size kyria but only 36 switches footprints are accessible. I exported two versions, one for a 3mm plate with 6mm standoffs, which is compatible with the acrylic plate case from splitkb . And one for a 1.5mm plate…
Rimless and high profile version of the original 40mm cirque circle trackpad holder. Trackpad is also closest to thumb keys 5mm higher than original version to be aligned with MDA keycaps profile. Supports are necessary and intended to…
This is a revision of my previous design for a case to fit the Kyria Mechanical Keyboard. Thank you Martin O. for suggesting this change. The major changes are; Combine the wrist rest with the keyboard case. Make the entire object the…
My 3d printable kyria OLED covers, including the pimoroni trackball holder. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 10 Filament: PolyMaker PETG/PLA Category: Computer
I really love the https://www.printables.com/model/589488-camping-kyria-case but there were some minor adjustments I wanted to make to the display cover. To use this to you'll probably need to drill the screw holes to the 1.6mm they are…
I use this case for my 5-column kyria, rev2 with soldered choc v1 switches. This design is inspired by the original chocofi keyboard case , however I created the model from scratch based on the kyria rev1/2 cad files . The height from the…
This is a mount for the pimoroni trackball to go on a kyria keyboard . The 3 similar designs (not the "original") would probably fit in any case, but the original is pretty specific to the case found here , which can also be seen in the…
Kyria case with underglow light holes. I made this a while ago, but figured someone may want it. I swapped back to my Lily58l pretty quickly, so please don't judge that I never sanded down the case…
Mount for Pimoroni trackball on a Kyria keyboard This mount enables you to mount the Pimoroni trackball within comfortable reach for your thumb. This will be mounted where one of the switches would go. I've only tried this with lowprofile…
This is rest designed specifically to go on this case: https://www.thingiverse.com/thing:4857192 It would also work on this case without the tenting: https://www.thingiverse.com/thing:4378710 The M5 screw through the bottom isn't entirely…
This is a remix of this case . It is exactly the same but I added the holes on the inside edges to tent the case. Please look at the source case to see what other hardware is required. The holes fit an M5 screw, length depends on the…
Many people asked so I added a 25 degree version. These are both for the high profile Kyria case. I would use supports when printing the 25 degree version. I prefer a steep tent for Keyboards. This is 45 degrees. There are 2 sets of…
After removing a large parts of the key I realized I also don't use most of the other features so I modified the case to also hide the mcu/oled place. Files are only for the right part, just mirror the parts to get left hand. The case is…
A tenting base for SplitKB Kyria, any revision. Allows easy insert and take out of the keyboard. Works with most cases. Any bottom that has the same dimensions as the PCB, eg. plate cases and the Camping Kyria case (Image below) fits…
Kyria Rev 3 mid layer that sits between top plate and PCB. This is perfect to use with metal plates in order to avoid shorts. It will make the keyboard tighter, look nicer and hot swap easier to perform. It will also dampen sounds.…
