Camping Kyria Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A really low profile Kyria case for choc hotswap PCB's. Bottom plates with cutouts for hotswap sockets.
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 77
- Makes
- 1
- Views
- 1,461
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A really low profile Kyria Case for Choc hotswap PCB's. Bottom plates with cutouts for hotswap sockets.
Top plate is 1.2mm and has a 0.8mm mid layer to make the plate sit flush against the PCB which eases removing and inserting switches.
Bottom plate is 2.2mm high with component cutouts to make the case extremely low profile.
Make sure to print with the top plate facing the print surface.
The bottom plate should be printed with the bottom facing the print surface.
4mm m2 distances should be used. Any m2 screw will do.
The knob fits EC12 encoders. The LCD Cover fits all Kyria cases.
Also, please see the EC12 knob I've made that fits any kailh choc build perfectly: https://www.printables.com/model/589307-ec12ec12e-encoder-knob-with-skirt
If you need a higher display cover to allow hotswap sockets for the controller, or have space issues in general, I recommend using the excellent display cover by @shiona_969771 found here: https://www.printables.com/model/847600-taller-display-cover-for-camping-kyria-case