Tikka T3X Tac A1 Mirage shield
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
a mirage shield which attaches to the Tikka T3X TAC A1 chassis
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 47
- Makes
- 0
- Views
- 1,388
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial
This is a 3d printable Mirage cover for the Tikka T3X Tac A1 rifle.
it attaches to the fron most half M-lok slot and so doesent influence the freefloating of the barrel. I modeled this around use with my Fortmeier over barrel bipod, but it can be used without one. No idea if other over barrel bipods are compatible
Printing
You should have a pretty good calibrated printer to start with, specific settings aren't that important, as this magazine loader doesent recieve to much stress.
It may be advisable to print the tall piec with a brim or some sort of adhesive, if you have problems with bed adhesion, as they have quite a small footprint.
I printed my example with a wall count of 4, but i don't believe this is really necessary.
The filament i used is Esun PLA+, but it should be printale in most filament.
printer settings
nozzle size 0,4mm
layer height 0,2
Nozzletemp 205-225 (whatever works for you)
Bedtemp 60 (whatever works for you)
walllinecount 4 (whatever works for you)
supports enabled