Counting matching models…
Print in upright position, no supports needed. Holes are designed slightly undersized so before assembly, drill through holes with 4mm drill. Designed for M4x30 bolt and M4 nut. 1/8 inch imperial hardware should work as well.
This is a 3d printable Magazines for the Tikka T3X Tac A1, CTR and Arctic rifles. Included are models for a 5 rnd and a 10 rnd version (with the 5 round variant being the more practical choice) which are a dircet replacement for…
A custom bigger bolt knob for tikka T3X. You will need to glue in in place like the original one.
A tool I made years ago but remade now that I know how to actually CAD correctly. This is a tool helps you take the end cap off as well as ‘cock’ the striker so you can put the bolt back in your rifle since the spring inside can be rather…
Tikka T1x Cheek Riser. Mount with 2 sided tape.
Tikka T1x is a great rimfire rifle, but the bolt handle is slick and small. When I run bolt faster - my fingers tend to slip off the handle from time to time. I designed a knob that fits on top of the stock bolt handle and allows a better…
This is another model to expand the collection of flagazines from DeWZ.
Print it verticaly with organic support for the inside of the grip and the front overhang. You should use from 4 to 6 perimeters to insure enough stress resistance. I printed mine in ABS to make it more sun-proof and to be able to do a…
Felt like my Tikka T3x CTR stock was slightly too short for optimal comfort so I designed and printed a stock extension that fits nicely with the stock and recoil pad. Print settings I used a 0.60mm nozzle, 5% infill and 7 walls to make…
My friend just made great re-mixes of the model including .step files so go check that out before this one. Use original spring. Printed in PLA on a ender 3 V3 SE. Prusament PLA. .22lr
Available as a free STL download Go to my website at masiinatek.com for purchase as an already printed part. There are three geometries in the block that interact with your bolt: Hole for the bolt face. Use to de-cock and re-cock and to…
Designed to be printed in a vertical orientation.
Tikka T3x bolt opening tool, for opening the bolt for maintenance. Print with 4-5 wall lines so it can handle the wear from usage.
6 round mag tested with over 300 rounds. 0 feed issues. 10 round mag feeds well in testing so far. (150 rounds tested) Printed with auto tree supports hotplate only. prusament PLA 0.16 layer hight 0.2 first layer 70% infill 4 walls spring…
I made different brands before for .22lr ammo box so i make a camo version as well. The spacing is 50pcs/25,4x6,14mm between the insert top and the bottom. And the total height is 28mm between top and bottom. I have made 2 minor…
Ergonomic bolt knob attachment for Tikka T3x bolt. 1x M5x25 cap head machine screw needed to expand the shaft and grip the bolt handle internally.
A single shot block for Tikka T3x tactical. Compatible with CTR magazine model only. ---------------- Material: ABS Supports: NO Outer walls: 5 Infill: Any. I used 40% just to make it heavy.
This single feeder is designed for Tikka T3x rifles and replaces the standard magazine to allow convenient single-round loading directly into the action. It is ideal for shooters who prefer or require single-shot operation, such as during…
Drop-in cheek riser replacement for Tikka Tac A1. Dimensionally very close to the original, with minor design improvements. Elongated cutout for easier bolt removal. Separate files for right-handed (RH) and left-handed (LH) users. Printed…
If you own an Actik, Tikka or Tikkina Headlamp from Petzl, you probably already lost one of these. It is one of the two clips used to adjust the lenght of the lamp's headband. Even though the lamp itself is quite robust, these tend to…
This model is designed to attach to the inside of a safe. Additional to the printed part you will need one or two magnets (20x10x5mm) and some thin rubber to increase friction (needed if you want to store a full magazine!). Slice with an…
I have no idea how many of the Tikka stocks are a match to the Tikka #x lite I have but when I went looking for a hog saddle to make there was not much of a selection to work with.. The tikka stock has a bolt ahead of the lug that is not…
This model is designed to attach to the inside of a safe. Additional to the printed part you will need one or two magnets (20x10x5mm) and some thin rubber to increase friction (needed if you want to store a full magazine!). Slice with an…
This is a 3d printable Mirage cover for the Tikka T3X Tac A1 rifle. it attaches to the fron most half M-lok slot and so doesent influence the freefloating of the barrel. I modeled this around use with my Fortmeier over barrel bipod, but…
Pour bien ranger et protéger une lampe frontale PETZL Tactikka Core. Les lentilles sont protégées et il reste juste la place pour le bandeau de serrage. Instructions d'impression Tout filament peut convenir à cet usage. Impression en…
This is a Wurkkos FC11 Headlamp Clip (for Petzl Tikka) to attach your flashlight to the side of a headlamp band. Right now, it only works on my old Petzl Tikka strap (25mm and with small buckles on the end), but I may make a version with…
A spare part for your Petzl flashlight that you will never lose. 1)We put the clip on the headband as shown in the picture. 2) Thread one end of the headband through the sturdy clip on the other end of the headband. 3) Thread the end of…
It's a power button replacement for good old headlight Petzl TIKKA XP: I added some improvements to make the button fit better in the socket. Obviously you need to use TPU to print this model. Also, I recommend to set Infill density to…
A tikka t3x mag-well mount. Requires using the magazine release latch to remove, which when paired with a trigger lock and or removal of the bolt the firearm can be mounted to a wall in your gun room ETC (depending entirely on your local…
A quick redesign of the spike tool for hutikka69 . Included step files in case it needs to be longer. Printed at 0.24mm layer height, 4 walls and 40% infill with a 0.6mm nozzle. Sturdy enough that I Can't really snap it by hand, only…
6 round mag tested with over 300 rounds. 0 feed issues. 10 round mag feeds well in testing so far. (150 rounds tested) Printed with auto tree supports hotplate only. prusament PLA 0.16 layer hight 0.2 first layer 70% infill 4 walls spring…
Ergonomic bolt knob attachment for Tikka T3x bolt. 1x M5x25 cap head machine screw needed to expand the shaft and grip the bolt handle internally.
A quick redesign of the spike tool for hutikka69 . Included step files in case it needs to be longer. Printed at 0.24mm layer height, 4 walls and 40% infill with a 0.6mm nozzle. Sturdy enough that I Can't really snap it by hand, only…
This single feeder is designed for Tikka T3x rifles and replaces the standard magazine to allow convenient single-round loading directly into the action. It is ideal for shooters who prefer or require single-shot operation, such as during…
The "neutral" model have clean cuts for easy changes for better grip etc.
A spare part for your Petzl flashlight that you will never lose. 1)We put the clip on the headband as shown in the picture. 2) Thread one end of the headband through the sturdy clip on the other end of the headband. 3) Thread the end of…
Felt like my Tikka T3x CTR stock was slightly too short for optimal comfort so I designed and printed a stock extension that fits nicely with the stock and recoil pad. Print settings I used a 0.60mm nozzle, 5% infill and 7 walls to make…
A design I made several years back that I'm uploaded to Thingiverse and I'm reuploading here. Its a simple tool that helps you ‘decock’ the striker in the bolt to help you take it apart.
Tikka T1x Bore Guide Printed with auto support standing on the bottom. If you want it for lefthanded rifles maybe just Mirror the model? i have NOT tested that.
The "neutral" model have clean cuts for easy changes for better grip etc.
Itse pidän mansikkahillosta pannarin päällä. Jotenkin Pirkka tekee parasta kaupan hilloa, ja kivasti hillon mukana tulee näppärä kantikas lasipurkki, joka on nippelien säilytykseen oiva. Korkkiin voi lisätä 1mm x 63mm tiivistekiekon esim.…
This allows you to carry your 10 round metal magazine from Tikka side saddle on your rifle, shown here on my T3x Ace Target. I printed this in ASA and it allows for quick access to a loaded magazine during match events. It's held in place…
v5 is a new stronger design over the original. Shown here printed in ASA. Uses original mounting points and hardware to mount to factory Ace Target stock.
Tikka T3X target 308 chamber/mag well flag. shows Text "SAFE" in the chamber. utilizes the mag release catch. Made with the snazzy Hex pattern Loop for key chain tag
This is a simple magazine for loading a single round into the T1X rifle. The simple ramp makes it a little easier to load one-at-a time instead of using the regular magazines.
A tool I made years ago but remade now that I know how to actually CAD correctly. This is a tool helps you take the end cap off as well as ‘cock’ the striker so you can put the bolt back in your rifle since the spring inside can be rather…
Wanted a flat trigger for my MDT rig, didnt like the complexity of some aftermarket options, and thought the stock trigger assembly was already very good. This was designed to allow for more finger positions and a more comfortable hand /…
The fit isn't perfectly flush to the slightly rounded stock but still seems to be close enough that the ARCA rail is straight/inline with the barrel and doesn't move around. To attach this, unscrew the front swivel stud and use an M5 bolt…
This Mag Holder to suit Tikka T1X 22LR (10 Round Mag) Can be attached to the side of the T1X and I have provided files for both L/H & R/H. Note: enable supports for underside of attachment block only.
Requires (1) M5 heat set insert , (1) M5x15-20 bolt , & (1) O-Ring ≈22mm ID . O-ring on interior of bolt handle cover is optional. May or may not improve grip on bolt.
