Tikka T3x CTR Stock Extension (10, 20 & 30mm)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stock extensions a T3x CTR, included is 10, 20 and 30mm.
- Rating
- 5 / 5
- Likes
- 26
- Downloads
- 370
- Makes
- 2
- Views
- 2,040
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Felt like my Tikka T3x CTR stock was slightly too short for optimal comfort so I designed and printed a stock extension that fits nicely with the stock and recoil pad.
Print settings
I used a 0.60mm nozzle, 5% infill and 7 walls to make it durable. Printed in Prusament Galaxy Black PETG.
Easy to print, no supports required, just make sure you use enough walls or 100% infill so it is durable.
Other notes
If using the 20 or 30mm you will need longer screws as the existing ones are too short.
Regarding the screws, another user (josuagh) wrote: "The stock screws are 1" 10-16 Phillips Oval Head Self-Tapping Screws. I added a 30mm spacer and replaced them with 2" wood screws."