Prusa Enclosure sliding lid lock with Complete Modified Hinges
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This slider lock works with @PetrZikumd 's Complete modified Hinged lid for Original Prusa Enclosure mod.
- Rating
- 4.5 / 5
- Likes
- 13
- Downloads
- 50
- Makes
- 3
- Views
- 553
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- GNU General Public License v2.0
Does your Prusa Enclosure have the lid mod? Do you like @MichaelQ 's Slider Lock Latch but you installed @PetrZikumd 's Complete modified Hinged lid for Original Prusa Enclosure mod? This mod will work with all of the above!
You'll need x2 M3nS nuts and x2 M3 10mm screws
Material: PETG
Layer: 0.2mm
Perimeters: 5
Solid layers - top: 5
Solid layers - bottom: 5
Infill: 25% (Cubic)
Supports: Just paint supports in the square opening for the latch bar
It's not necessary but you can mirror the latch housing however the fit is a bit tight so when you assemble the housing it looks like it's one piece.
marked places:
Post your makes if you like!