Tool-Grid 22mm Wheel Lock Key Tray Set
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These Tray Sets can hold 1, 2, 4 & 10 22mm Wheel Lock Keys which can be fastened to Matco's Tool-Grid Organizer System
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 32
- Makes
- 0
- Views
- 315
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a Wheel Lock Key Tray Set for Matco Tool-Grid Tool Box organizer system. Holds 1, 2, 4, and 10 22mm Hex Wheel Lock Keys however I made the diameter of the sockets 26mm for a loose fit and ease of inserting and removing the keys from the holders as well as slightly curved edges for appearance. The bolts that come with the Tool-Grid kit will work perfectly fine with these and all bolt holes are useable together.
MODELS WILL NOT SCALE (effectively), it will cause the Tool-Grid mounting holes to be improperly aligned and sized.
Any suggestions? Please let me know in the comments!
- Basic Print Settings
Material: PLA
Layer Height: 0.20mm or 0.10mm
Infill: 15%
- Dimensions
Height: 13mm for all Except Single / 17.3mm
Length: 32mm / 68mm / 68mm / 176mm
Width: 32mm / 32mm / 68mm / 69mm
- Socket Dimensions
Diameter: 26mm
Depth: 10mm
Surface Height: 3mm for all Except Single / 7.3mm