P
Printables
Toolgrid Board Generator
Toolgrid Board Note - MaxTheSpy has updated his model with additional improvements and better explanations of the settings than what I have. You may find it easier to use:…
Search results: toolgrid
Counting matching models…
P
Printables
Toolgrid / Side / Corner panels
Modified original panel to side panels, this suitable for drawers measuring 530x400 mm (lenght x width) "BaseToolgrid_ParteLateral" It is 73,8mm width. "BaseToolgrid_ParteSuperior" It is 87,8mm width
P
Printables
Toolgrid Low Profile Extension Holders
I created these because the normal extension holders take up a ton of room and having things vertical save even more space. The 1/4 in vertical will need to be printed w/ a .4mm nozzle to allow smaller details to print so that it is…
P
Printables
Skeletonized Toolgrid compatible Plate
Pretty straight to the point: this plate is skeletonized to save filament. Each plate uses about 75 g of filament. It prints faster with a 0.6 mm nozzle if you have it, but works just fine with other sizes. Use max layer height. Print…
P
Printables
Toolgrid to Gridfinity base plates
Had some extra space and some tools that I wanted protected by a box. So why not combining the two. Finally decided to make all of them, because why not. From 1x base to 6x base. For 2x and plus bases, there are 4 screws sockets. In…
P
Printables
Toolgrid bins (Modular)
Needed some simple boxes for my Toolgrid system. 14.5cm x 7.5cm, no pegs. 2 screws holes so it won't shift. The walls are designed to be easily removable. You can add a small drop of hot glue at the bottom to make them semi-permanent.…
P
Printables
Milwaukee Insider Bit Holder For ToolGrid
Will fit all of the Milwaukee Insider Electric Ratchet bits that come with the tool. Designed for the OlsaTools Tool Grid Platform. Printed in PLA+ with 0.2mm layer height, 15% infill, supports enabled, and 4 wall loops.
P
Printables
Milwaukee M12 battery holder for Toolgrid
I made this holder for my M12 batteries to adapt to toolgrid. Holds a single battery.
P
Printables
Toolgrid Cam
The cam is for keeping tools up against the walls and/or corners created by MaxTheSpy. there are two files for use, one at the standard 1" size and another at 1.75" for larger tools. Linked below is the walls and corners MaxTheSpy makes…
P
Printables
Dewalt 2 battery holder (Toolgrid)
I printed it in PLA at 25% infill and standing vertically.
P
Printables
Toolgrid Socket Stud
The three models are for the Toolgrid system. Ones I found online were not at the tolerance I preferred so I made these. They are .254mm smaller than the actual size keeping it nice and tight to the socket but not tight enough you can't…
P
Printables
Toolgrid 1/2" ratchet head holder
I made this after using a few other people had made. They always seemed to be a little snug on the square drive of the ½" ratchet so i made one that is slightly bigger internally. Works with toolgrid and can be paired with either the…
P
Printables
Toolgrid 1/4" deep socket tray
These are deep socket trays to work with the toolgrid system and CASOMAN deep sockets. I am not sure if it will fit other ¼" drive deep sockets but you can print and try. I have given the files for both SAE and Metric. SAE I could fit on…
P
Printables
Toolgrid Universal socket holder
This holder works with the pittsburgh pro universal sockets that come in 3/8" and ½" drive. It is meant to screw down with the tool grid system.
P
Printables
Toolgrid 4 inch cutoff wheel holder
I made this for a typical 1/4" die grinder cutoff wheel or use it for the cutoff wheel discs.
P
Printables
Grinder wheel holder for Toolgrid
I made this for 7/8" grinder discs. It would hold stacked cut off discs, grinder stone or a flap wheel disc.
P
Printables
Machinest ruler holder for Toolgrid
I made this specifically for Mr.Pen macinest rulers but it could work for something else im sure.
P
Printables
Large wrench holder for Toolgrid
I designed this to lay flat in my drawer for my larger wrenches. It could have a different use for sure.
P
Printables
Toolgrid Board Generator
Toolgrid Board Note - MaxTheSpy has updated his model with additional improvements and better explanations of the settings than what I have. You may find it easier to use:…
P
Printables
Toolgrid Wrench Holders with Magnets
A newer version with embedded labels is now available: The addition of a magnet in these wrench holders keeps the wrench in place better when used in a rolling tool cabinet. I used 12mm x 2.5mm magnets. They hold pretty well. It could be…
P
Printables
Toolgrid Walls Corners Cam and Tee
Updated December 2025 - Added OpenSCAD generator to make custom sizes Use walls and corners to hold irregular shaped items in place on Toolgrid boards. The tee is great when multiple items are close together. Holes are provided in the…
P
Printables
Toolgrid Pliers Holder
Inspired by the pliers holders from MaxTheSpy https://thangs.com/designer/MaxTheSpy/3d-model/ToolGrid%20-%20Small%20Pliers%20Holder-1079181 I despise supports, so I made this to print without supports. I use 1/8 x ½" roll pins in the…
P
Printables
Toolgrid Board Parametric
Parametric OpenSCAD generator for a ToolGrid-style base plate board using 4 mm through-holes on a 9.5 mm center-to-center grid . The board maintains precise spacing and edge alignment, with optional edge connectors so multiple boards can…
P
Printables
Toolgrid Single Hex/bit holder
Single bit holder for the toolgrid system. Peg is optional, but is a snug fit in the bit holder. Designed to be able to place several next to eachother with no spacing.
P
Printables
Toolgrid Hex Bit Holder (Parametric)
Customizable hex bit holder with as many rows and columns as you need. The optional mounting holes are auto spaced for a toolgrid board. Can be set for 1/4" (most common), 5/16" (impact driver) and 3mm (precision) bits.
P
Printables
Toolgrid / Side / Corner panels
Modified original panel to side panels, this suitable for drawers measuring 530x400 mm (lenght x width) "BaseToolgrid_ParteLateral" It is 73,8mm width. "BaseToolgrid_ParteSuperior" It is 87,8mm width
P
Printables
Toolgrid Low Profile Extension Holders
I created these because the normal extension holders take up a ton of room and having things vertical save even more space. The 1/4 in vertical will need to be printed w/ a .4mm nozzle to allow smaller details to print so that it is…
P
Printables
Toolgrid Plier Holder - Small
a small plier holder with adjustable arm for the Toolgrid System.
P
Printables
Toolgrid Plier Holder - Large
a large plier holder with adjustable arm for the Toolgrid System.
P
Printables
Skeletonized Toolgrid compatible Plate
Pretty straight to the point: this plate is skeletonized to save filament. Each plate uses about 75 g of filament. It prints faster with a 0.6 mm nozzle if you have it, but works just fine with other sizes. Use max layer height. Print…
P
Printables
Toolgrid to Gridfinity base plates
Had some extra space and some tools that I wanted protected by a box. So why not combining the two. Finally decided to make all of them, because why not. From 1x base to 6x base. For 2x and plus bases, there are 4 screws sockets. In…
P
Printables
Toolgrid bins (Modular)
Needed some simple boxes for my Toolgrid system. 14.5cm x 7.5cm, no pegs. 2 screws holes so it won't shift. The walls are designed to be easily removable. You can add a small drop of hot glue at the bottom to make them semi-permanent.…
P
Printables
Toolgrid Wrench Holders with Labels
These print flat for minimal color changes - the colored label is done in only 2 layers. An embedded magnet can be installed in the back side after printing. No supports required. If you prefer the labels in front of the wrench, there is…
P
Printables
OpenGridMount - Pliers Adapters (ToolGrid Compatible)
OpenGridMount Pliers Adapter The OpenGridMount pliers holder is designed to store pliers, cutters, and similar hand tools in an upright and secure position. Unlike a simple open holder, this design includes a lever-style retaining arm…
P
Printables
OpenGridMount - Cams (Toolgrid Compatible)
OpenGridMount Adjustable Cams – Small, Medium & Large The OpenGridMount adjustable cams are designed to secure tools, cases, boxes and other irregularly shaped items that do not naturally align with the ToolGrid mounting points. Each cam…
P
Printables
OpenGridMount - Dremel Shaft Adapters (ToolGrid Compatible)
OpenGridMount Dremel Adapters Keep your Dremel rotary tool attachments organized, upright, and easy to grab with these OpenGridMount Dremel adapters. The adapters securely mount to compatible ToolGrid-style base plates using a locking…
P
Printables
Toolgrid Label Generator
Introduction Easily create a group of labels for your toolgrid. These labels have pins on the back side that lock in to the holes in your tool grid. Make sure to do a test print to confirm the pin sizes. Quick Start It is recommended to…
P
Printables
Toolgrid Micrometer Holder
These holders set your micrometer at a slight angle so they are easier to grab. These are sized for Starrett micrometers; the FreeCad drawing is provided if you want to customize it for other brands. Print without supports.
P
Printables
OpenGridMount Socket Adapters (ToolGrid & Toolify3D Compatible)
OpenGridMount Socket Adapters OpenGridMount socket adapters are designed to hold individual sockets securely on compatible grid-based toolbox organization systems. Instead of using a fixed socket rail or tray, each adapter mounts…
P
Printables
OpenGridMount - Custom Grid Board - (ToolGrid & Toolify3D Compatible)
OpenGridMount Customizable Base Plates This OpenSCAD project allows you to create custom grid-mount base plates sized for your specific workshop organization needs. Unlike some commercially available boards, OpenGridMount base plates…
P
Printables
OpenGridMount - Custom Grid Board - (ToolGrid & Toolify3D Compatible)
OpenGridMount Customizable Base Plates This OpenSCAD project allows you to create custom grid-mount base plates sized for your specific workshop organization needs. Unlike some commercially available boards, OpenGridMount base plates…
P
Printables
OpenGridMount - Walls & Corners (ToolGrid & Toolify3D Compatible)
OpenGridMount Walls & Corners OpenGridMount walls and corners are designed to keep loose items from sliding around inside your toolbox drawers. Dedicated organizers work well for frequently used tools, but not every item needs—or has—a…
P
Printables
OpenGridMount - Walls & Corners (ToolGrid & Toolify3D Compatible)
OpenGridMount Walls & Corners OpenGridMount walls and corners are designed to keep loose items from sliding around inside your toolbox drawers. Dedicated organizers work well for frequently used tools, but not every item needs—or has—a…
P
Printables
OpenGridMount - Tool Tip & Ratchet Adapters (ToolGrid & Toolify3D Compatible)
OpenGridMount Tool Tip & Ratchet Adapters OpenGridMount tool tip and ratchet adapters are designed to help organize tools that do not always fit neatly into standard holders. These adapters provide simple mounting points for ratchet ends,…
P
Printables
OpenGridMount - Wrench Adapters (ToolGrid Compatible)
OpenGridMount Wrench Adapters OpenGridMount wrench adapters provide several ways to organize hand tools vertically on compatible grid-based toolbox organization systems. The included holders are useful for arranging combination wrenches,…
P
Printables
ToolGrid compatible 6x6 peg board
was too poor to afford the toolgrid boards, so I made them myself. they snap into each other pretty securely
P
Printables
ToolGrid Extension Holders and 1/2" Ratchet Holder
The Extension holders are various sizes for the front and back end of the extensions and other tools. Tried to design a smaller footprint so you could gain space for more tools. They will also work for the back side of the socket wrench…