Phone Stand with Cable Cutout and Feet Indents
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple-shaped phone stand with a large opening for a charge cable and indents for rubber feet
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 24
- Makes
- 0
- Views
- 114
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
A simple phone stand with a cutout for a charge cable and phone-ledge high enough off the table surface so a charge cable doesn't bend too much. It also features indents on the bottom that accept 10mm(3/8") diameter x 3.7mm thick self-adhesive rubber bumper pads for anti-slip purposes. I personally used these ones: https://www.acehardware.com/departments/home-and-decor/furniture/protective-furniture-pads/5044524
Fits phones/cases of 13-14mm thick or less.
Let me know if you'd like an alternate version.
Print on its side and should only require just a little bit of support for the upward “prong” of the phone ledge.