Phone Stand with Cable Cutout and Feet Indents
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple-shaped phone stand with a large opening for a charge cable and indents for rubber feet
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 116
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple phone stand with a cutout for a charge cable and phone-ledge high enough off the table surface so a charge cable doesn't bend too much. It also features indents on the bottom that accept 10mm(3/8") diameter x 3.7mm thick self-adhesive rubber bumper pads for anti-slip purposes. I personally used these ones: https://www.acehardware.com/departments/home-and-decor/furniture/protective-furniture-pads/5044524
Fits phones/cases of 13-14mm thick or less.
Let me know if you'd like an alternate version.
Print on its side and should only require just a little bit of support for the upward “prong” of the phone ledge.