1 / 6
Ambient light sensor case for Seeed XIAO RP2040 and BH1750
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case for an ambient light sensor using a Seeed XIAO RP2040 microcontroller and a BH1750 light sensor.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 36
- Makes
- 0
- Views
- 467
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A case for an ambient light sensor using a Seeed XIAO RP2040 microcontroller and a generic BH1750 light sensor. The case has a sleek cubic design and is modular. The microcontroller mount for the XIAO is easy to replace and remodel, in case you'd like to use a different MC. The top of the case is covered with a piece of frosted transparent film. The film diffuses incoming light, making the sensor response less directional. It also protects the sensor from dust.
Print settings
- Layer height 0.2 mm
- Line width 0.42 mm
- 3 wall lines
- 4-5 top & bottom layers
- Infill ≥15%
- Supports enabled, tree supports recommended
Approximate print time @ 60 mm/s: 2:30 h