1 / 4
Dual SATA SSD mount for CWWK/Topton X86-P5
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bottom SATA mount for CWWK/Topton X86-P5 mini pc.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 80
- Makes
- 0
- Views
- 1,389
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
- Material: PETG, ABS, or ASA
- Two parts need to be printed:
- Pegs facing upwards
- Pegs facing upwards, mirrored along the Y axis
- No support required
- 0.20mm layer height
You should be able to reuse the original 4 screws to assemble them. The SSDs are held by the pegs only.