1 / 5
HSW screw inserts for better attachment
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy attachable screws.
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 73
- Makes
- 1
- Views
- 686
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I was a little annoyed, because it is really hard to get the inserts out of the HSW. So i designed these inserts. You can still use them as usual but there is also a thread so you can screw in different parts.
I also added just the screw so you can attach it directly to your part.
Printing:
If you need you parts to be perfectly level, you should print screw_insert_for_nut.stl and Nut_M14.stl. If the orientation is not that important just print screw_insert_without_nut.stl
Also depending on your adhesion you should print the screws in a specific orientation:
- if you have good adhesion you can print the screws with the tip facing the plate. That way you dont need support.
- If you have bad adhesion you should print the screws with the tip facing up. You need supports if you print it this way.
Settings:
- 0,16mm layer height
- 3 walls
- 20% infill
- no supports (besides the screws)