Sonoff Motion Sensor SNZB-03 Corner Mount
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.56 – €1.91 net (excluding VAT)
For file: Sonoff_SNZB-03_corner_angle_30_0.2mm_PLA_MK3S_1h43m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.73 excluding VAT (range midpoint).
- Weight reported by the author
- 22 g
- Print time reported by the author
- 1.72 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Corner mount for Sonoff SNZB-03 motion sensor, decline angle of 30°. Mounted with double-sided tape. No support needed.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 79
- Makes
- 0
- Views
- 354
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
Corner mount for Sonoff SNZB-03 motion sensor with a decline angle of 30°. Mounted with double-sided tape.
Designed to fit snugly around the sensor. When not mounted to a wall the sensor can slide in and out sideways. If the fitment needs adjusting it's possible to carefully heat the part with a heat gun and adjust it.
The shown part does not have a hole for the paring button but files for both with and without the hole are available. G-files for for a faster print with only a 2 layer perimeter are also available.
Pint Settings
Material:
PLA
Infill:
10%, Honeycomb
Layer height:
0.15mm, higher layer height will probably work fine
Outer Perimeters:
4 layers, 2 layers will probably work fine
Supports:
No