1 / 2
Dell Optiplex SFF power supply to ATX adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter plate for mounting a power supply from an SFF Optiplex into an ATX case.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 139
- Makes
- 0
- Views
- 1,557
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Adapter plate for mounting a power supply from an SFF Optiplex into an ATX case.
Printing
Printed in PLA with 4 outer walls and 20% infill. The power supply can sag a little with these settings (see image), so higher infill is advised when mounting the PSU in the top of the case.
Mounting
4x 6-32 screws (standard ATX PSU screws) screw directly into the adapter plate and the Dell PSU screws can be reused to mount the PSU to the plate. Note that you need ~23 cm of clearance to fit the PSU in your case.