EPS32 Camera Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple camera case for those wanting to use the onboard antenna and use a USB programmer board for power input
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 64
- Makes
- 0
- Views
- 441
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
There are lots of great cases for the ESP32 camera out there but none of them quite suited my needs. I wanted a simple case that would hold the ESP32cam board and the cheap USB programming boards they are now often sold with. This meant I wanted the USB socket exposed for power and programming. I'm happy to use the onboard antenna so didn't include a hole for that in this version. I did include a hole for the LED/Flash. There are two versions of the smaller case top, one with a cutout for an SD card, and one without that, I often use these just to monitor machines so don't use the SD slot that often.
I've printed it in PETG but any filament should do really. I used some 3.5mm length thermal inserts in the case top holes and then used 20mm M2 bolts. It fits together really securely and the inserted PCB's are a press fit with no rattling. Hope you find it useful. It's made in FreeCAD and the project files are included.