1 / 1
1/3 Scale Federal Signal 3T22A (REDONE) — image 1

1/3 Scale Federal Signal 3T22A (REDONE)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a perfect 1:3 scale functional replica of a Federal Signal 3T22A. Measured off my REAL 3T22!!!

Rating
5 / 5
Likes
55
Downloads
827
Makes
7
Views
5,628
Reviews
6

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial

README:

 

All stls are already in the correct print orientation.  

Motor:
Any 29 series Samsung microwave blower- DE31-00029H, DE31-00029K, DE31-00029J, etc etc

You can find these for decent prices on ebay.

If you want to have the more common Marathon motor instead of the 3 phase Northwestern, you can download Demetrius's Marathon model here! https://www.printables.com/model/1003267-marathon-13rd-scale-215tc-for-mini-3t22 

 

Hardware:

M4x14mm (or 16mm) machine screws (6x)  Stand + spacers to the intake


M4x8mm machine screws (10x) Stand and A frame

M4 nuts (16x)

M3x12mm machine screws (55x) Intakes and horns

M3x10mm machine screws.   Most general parts

M3x8mm machine screws (8x) Solenoid box covers

M3x6mm machine screws (4x) Hold junction box to the motor

M3 nuts wherever needed

M2x10mm machine screws (6x) Hold damper arm to damper shaft, and outer bearings.

M2x8mm machine screws (20x) Damper lips and outer bearings

M2x6mm machine screws (4x) Junction box cover

M2 nuts wherever needed

1/4" x 2" eyebolt (I walked into my local Ace hardware and bought one.  Comes with a nut too!)

M3x5.7mm brass threaded inserts (29x) (21x if using M2 solenoid boxes)

https://www.amazon.com/gp/product/B081BCRZZS3   (I used these)

M2x4mm brass threaded inserts (2x) (connecting rod screw hole on the damper arm)

(10x if using M2 solenoid boxes)

https://www.amazon.com/dp/B088QJG676   (I used these)

Junction Box:

A very specific 8uf capacitor https://www.amazon.com/dp/B0143VJN40

Small wire nuts (2x)

Cable clamp connector with 1/2" knockout.  Can pick these up super cheap at hardware stores like lowes or home depot.

Generic 120v cord.  I use the Husky 16 gauge 8 foot cord that Home Depot has on the shelf for $11


 

Solenoids:

JF-0826 (I used 24V but Demetrius used 12V ones and they also work perfectly)

 

 

Rotor installation:

 8mm to 8mm 14mm OD 25mm L shaft coupler 

https://a.co/d/0iklOR8R

10 gram slotted weights (28x)

https://www.amazon.com/dp/B0D2Q2QW43

To secure the weights, simply push them into the bottom of the rotor.  They should just slip right in.  If needed, you can tap them in with a hammer.  These are made of steel, so it should be alright to take some hammer taps.

Put a set screw in both top holes on the shaft coupler.  leave the bottom two screw holes empty.  Then tap the coupler into the rotor from the bottom with a plastic mallet or plastic screwdriver handle. 

Make sure the set screws are lined up with the access cutouts in the rotor hub.  Don't use a hammer, you can damage the soft aluminum coupler.


Once u have assembled the siren, you should secure the siren with tape or bolt it to a mount (M4 machine screws).

If u don't do this, the siren will spin on startup like that Screamer did at Sirencon that one year.

 

Tags