Case for sim racing car spotter and flags
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.67 – €0.82 net (excluding VAT)
For file: Flag Case (Perspex)_0.2mm_PLA_MK3S_40m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.74 excluding VAT (range midpoint).
- Weight reported by the author
- 11 g
- Print time reported by the author
- 39.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a case designed for an WS2812B RGB Module and an Arduino Pro Micro, as per amstudio's great explanation video…
- Rating
- 5 / 5
- Likes
- 46
- Downloads
- 261
- Makes
- 3
- Views
- 1,847
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a case designed for an WS2812B RGB Module and an Arduino Pro Micro, as per amstudio's great explanation video at https://youtu.be/4oywox9-B-o. This provides real-time information for sim racing drivers such as the current gear in place, active flags, car spotter, pit lane limiter, etc.
The bottom case is meant for the use of thread inserts (M3). The top case accepts M3 screws, which should go exactly flush and be 10mm long.
The USB-C port of the Arduino is meant to be on the left-side of the box. No screws are necessary to keep the Arduino nor the RGB LED module in place.
Follow the instructions from the video for the list of parts, and how to solder and assemble them. The video also explains how to flash and setup the device once completed.
The "perspex" file can be used with transparent filament instead of a plexiglas cover; it is only 2mm deep, even though the cover is meant for a 3mm cover. It should clip nicely in place though.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Supports:
Yes
Infill:
20%
Filament: Prusament or colorFabb PLA or XT Any
Notes:
Support is only recommended for the top case, on the build plate.
Category: Electronics