Minimal Material Selfwatering Planter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
One piece self watering planter with 1.2mm walls
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 29
- Makes
- 0
- Views
- 225
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
Con la intención de ahorrar filamento manteniendo la impermeabilidad del macetero diseñe este modelo manteniendo 1.2mm de grosor en las paredes esto con la intención de ser impreso con 3 muros de grosor y aumentar las probabilidades de mantener la impermeabilidad.
Se recomienda imprimir con un un 105%-110% de sobreextrusion.
En mi caso los imprimi con 110% y dos muros de 0.6 ya que uso un Nozzle de 0.5m pero esta pensado para usar 3 muros de 0.4.
With the intention of saving filament while maintaining the waterproofing of the planter, I designed this model keeping a thickness of 1.2mm in the walls, aiming to be printed with 3 walls thickness and increase the chances of maintaining waterproofing.
It is recommended to print with a 105%-110% overextrusion.
In my case, I printed them with 110% and two walls of 0.6 since I use a 0.5mm Nozzle, but it is intended to use 3 walls of 0.4.