1 / 2
Filiment Spool Holder — image 1
1 / 2

Filiment Spool Holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

These are parts that I modified from http://www.thingiverse.com/thing:3066 to fit oak dowels that I already had. I…

Rating
0 / 5
Likes
4
Downloads
27
Makes
0
Views
845
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Share Alike

These are parts that I modified from http://www.thingiverse.com/thing:3066 to fit oak dowels that I already had. I also used the Spool bushing for 608 bearings http://www.thingiverse.com/thing:15868 created by
Miro87043 for the center.

Instructions

Print out one of each stl file and connect with 3/8" dowels or equivalent aluminum rods. Sides are 200 mm long and the bottom two can be as long as you want. I used a 1 foot long 5/16" threaded rod and nuts to go through the 608 bearings. It can hold up to three spools if spaced right.

Category: Other

Tags