1 / 8

Pwnagotchi Case (without PiSugar)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Doelmm

@Doelmm_1118776

Multi-color separated prints for more colored case. With your own charging method.

Rating: 0 / 5
Likes: 5
Downloads: 46
Makes: 0
Views: 884
Reviews: 0

Updated at source: Jun 18, 2024

Model information

Source: Printables
Category: Portable Devices
License: Creative Commons — Attribution — Noncommercial

Details Files (3)Makes & comments (Makes: 0) (Comments: 0)Remixes (0)Collections (5)

Small Notice

I recommend adding some glue on the sides of bottom snap covers to keep the lid attached better to the main case.

NEW AMS OPTION ON MAKERWORLD:

https://makerworld.com/en/models/494603#profileId-408615

Components for Pwnagotchi I used:

Raspberry Pi Zero W.
Waveshare E-Paper 2.13 inch v4 display.
Battery 1200mAh, 3.7v.
TP4056 charging board.

Needed Items:

Glue.
Foam (For filing inside space and pressing the display closer to case securing it with battery)
BMS/Charging module (TP4056 recommended)
Battery 1000mAh or 1200mAh Lithium Ion 3.7v
Switch.

Setup:

Manually switch goes on top, BMS goes to side where C-Type hole is, glue it ON BOARD, NOT CASE as close to hole for whole raspberry pi zero and display removable. Connect battery and move battery in the back where back cover is and add foam at the brackets to secure the board or press to case, and battery, so it won't move along the case.