1 / 4
Tool for Watering Can
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter for a watering can to water over a wide area with low water pressure
- Rating
- 0 / 5
- Likes
- 43
- Downloads
- 129
- Makes
- 0
- Views
- 896
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
Used for 10L watering can. The mount is 28mm wide. Normal adapters are 27mm wide. I measured at my watering can and on the biggest side it was 28mm. The fit was not perfect, but I used some heat and pressed the mount a bit to the watering can so it’s working as expected.
The adapter is used for plants which are small and to much water would destroy them. So the lower preasure of the less amount of water should help to water easier.
----
Printed with 0.2mm, use support for the watering can mount.
PETG recommended