1 / 4
Sv06 (and plus) spool holder with BEARINGS (608/skateboard) — image 1
1 / 4

Sv06 (and plus) spool holder with BEARINGS (608/skateboard)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Complete replacement for the stock spool holder, allows for less friction (helps with TPU, amongst other things)

Rating
0 / 5
Likes
12
Downloads
54
Makes
0
Views
518
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

A spool holder with bearings.  Very similar to the ones I mention but 100% designed by me, without more than a glance at the original. 

I made it in a way that requires no support, although there is ONE build in support that needs to be removed.  the attachement method is to stick in in instead of the stock holder, and then use the little wedge in that oblong hole to hold it there. there are 3 thin circular spacers to use as you need (ialone or in combination) to get a really tight hold - it should not rotate easily. 

all you need is 2x 608 bearings.  I didn't remove the grease from mine as you NEED some degree of resistance to prevent the spool from simply unwinding.  

print is, then assembly is VERY easy and straight forward, everything only fits in one spot. 

I printed PLA, 0.3 layer, .4 nozzle, 3 walls.  i forget what infill but probable something like 30% NOT Line (any of the proper ones, like grid ot cubic or whatever).   the pacers are designed to be printed at 0.2 layer thickness, but they work fine at 0.3.  

total print time on a pretty fast profile was 1h59 minutes.  make certain you turn up the fan for the top of the roller, or else it'll look meh. 

Please like  if you do, and posts makes if you make one.  

Tags