AM4 Bracket adapter for XSPC Waterblock
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I'm not sure what model this block is since I couldn't find it anywhere on the website. The block(with the stock…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 0
- Views
- 221
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
I'm not sure what model this block is since I couldn't find it anywhere on the website. The block(with the stock bracket removed) is somewhere around 50x50mm. Should fit snugly. Print with relatively high infill and 4 shells minimum.
Take off the stock bracket with the 4 screws on top. My motherboard used 6/32 screws to attach the heatsink. You'll need longer ones I decided that 25mm was the right length but they only come in inch lengths so 1 in is fine. Make sure to tighten it in the cross pattern(corner to corner) to make it go.
Print Settings
Printer Brand:
FlashForge
Printer:
Creator Pro
Doesn't Matter
Supports:
No
Filament:
Who cares ABS or PETG
Notes:
Print in a higher temp filament. This part will have to withstand temperatures of up to 100C in the worst case without warping.
Category: Electronics