1 / 3
Front/lid for 10-in-1 USB hub by ASOMETECH
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Front/lid for 10-in-1 USB ASOMETECH hub/port replicator.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 79
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
This is the lid/front replacement for SW10 ASOMETECH 10-in-1 USB hub/port replicator.
Link for the device: https://pl.aliexpress.com/item/1005005880131911.htm
The original lid has been cracked.




Printing details
Printing
Print with bottom on build plate standing.
Filament - PLA/PETG
Infill - 15%
Layer Height - .15mm to .20mm
Supports - None
Perimeters - None
Additional Parts - None
Bed Adhesion - You may want some glue stick to ensure good bed adhesion, but in general it's not needed.
Rafts - None
Scaling - None
Filament Change - None
Post Printing Notes: May need some grinding.