1 / 1
Axial Ryft front cross brace
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple cross brace for the Ryft to replace the original
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 26
- Makes
- 0
- Views
- 379
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
I needed a cross brace for the front of the Ryft cage after cutting the original off in order to install a modified battery tray.
Printed this in PLA with supports on. Depending on your printer you may want to use a brim.
Can be used with original M3 screws, but using new screws which are 5mm longer will strengthen the piece.