1 / 1
ES15 Driver and Bit Holder - Multiboard
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
ES15 Driver and Bit Holder for the Multiboard mounting system
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 76
- Makes
- 0
- Views
- 451
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Modified the original hole spacing to be used with Multiboard (https://www.multiboard.io).
The drawer remains unchanged.
You must use one of the following Multiboard M3 Heatset Insert Snaps (print 2 of them):
- https://thangs.com/designer/Keep%20Making/3d-model/Heat%20Set%20Insert%20Snap%20-%20M3%20Standard%20%26%20Short-1030714
- https://thangs.com/designer/Keep%20Making/3d-model/Heat%20Set%20Insert%20-%20Weight%20Bearing%20Snap%20-%20M3%20Standard%20%26%20Short-1030725
Recommended hardware:
- 2x - M3 5x4 heat inserts (https://www.amazon.com/gp/product/B0B398W1CC)
- 2x - M3x12 Flat head/Tapered screws (https://www.amazon.com/iexcell-Socket-Screws-Assortment-Finish/dp/B0C6DP5996)
Recommended Print settings:
- Height: 0.2mm
- Walls, Top & Bottom layers: 3
- Infill 15% - Grid