RockNRoller Filament Guide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
All direction guiding Filament through top of IKEA LACK table
- Rating
- 5 / 5
- Likes
- 35
- Downloads
- 138
- Makes
- 2
- Views
- 1,069
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Dear Printer Dudes and for all selfmade enclosure builders,
i found so many good parts here and finally i hope to give you something back ;-)
Just designed and tested the all new RockNRoller Filament guide.
It can be used for any hole through top of an IKEA table but in special with the cone tunnel from here:
https://www.prusaprinters.org/prints/30576-ikea-lack-filament-guide
The files are optimized for bridging, pressfit tolerance and of course good print quality, since you need to press some beerings into the brackets.
Used Material:
- PLA-Lemon green (Prusament of course)
- 2x RS608 Roler Bearing
- 2x Wood screw stainless 3,5x25
- 2x 4,2 washer
If you like it, I love it!
UPDATE: bottom bracket has been adopted not to slip any more after some time of use!
Cheers