BCAR Compatible Barrel Shroud for Kirin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I love the stock barrel shroud's look, but it doesn't allow for any rifling device, so I made it bigger.
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 52
- Makes
- 1
- Views
- 853
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial
I remade the shroud from scratch then made the shroud big enough to allow for a BCAR.
It can probably fit any BCAR but I've tested with the Worker BCAR without sleeve, ex BCAR, and ex BCAR rev2.
Print Instructions:
3-4 walls, 15% infill, gyroid
Print one and print another mirrored one, so you have both halves. Ensure you have correctly mirrored it or else it won't fit.
I printed mine on an angle to add white stripes using my AMS.
Hardware:
4x M3x25
4x M3 Nuts
Assembly:
- Press the nuts into the holes of one half. It might be a tight fit. With the part on the table, I used a small M3 screw and my screwdriver to push.
- Put the two parts together over your barrel, BCAR, & the alignment peg on the Kirin.
- Screw together
Again, please ensure you have correctly mirrored it or else it won't fit.