1 / 3
Prusa Mini 10mm Y axis belt upgrade printable parts — image 1
1 / 3

Prusa Mini 10mm Y axis belt upgrade printable parts

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Printable parts from original Prusa Mini to fit 10mm belt and it's pulleys.

Rating
0 / 5
Likes
29
Downloads
59
Makes
0
Views
1,453
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Printable parts from original Prusa Mini to fit 10mm belt and it's pulleys. Should increase stiffness of y axis belt and, teoretically, allows to inchrease accelerations without receiving more ringing. 

Can't test it properly because after I installed it, I realised, that input shaper at my klippered prusa mini was configured incorrectly (don't use adxl345, this is evil). But after correct calibrating and installing this upgrade, i've managed to inchrease accelerations from 2400 mm/s^2 to 3000mm/s^2 with the same ringing level.

To install this upgrade you will need:

  • 500mm of 10mm width belt (gt2)
  • pulley wheel 16T with 5mm bore for 10mm belt
  • pulley idler for 10mm belt and 3mm bore
  • some tools and patience

Highly recomended to print it with PETG or ASA/ABS. DO NOT USE PLA. It may bend because of heat or creep deformation. 

Tags