Subaru Legacy Outback 2011 (4th gen) trunk pins
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pins for the side trays below the "floor" of the trunk on a Subaru Legacy Outback 2011 (4th gen).
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 89
- Makes
- 0
- Views
- 577
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Share Alike
Pins for the side trays below the "floor" of the trunk on a Subaru Legacy Outback 2011 (4th gen).
Tested on a European Outback 2011 2.0D (diesel engine) model. I assume it is the same across all variants of the same year at least though.
Notes on materials & printing
Print lying down on the side for maximum strength in length direction of pin. Needs supports enabled unfortunately.
Since this is going in a car which can get hot I suggest NOT using PLA. PETG or ABS would be good choices. Due to the shape of it it is easy for it to want to warp and lift off the bed of the printer, even with a brim!
When using PrusaSlicer I suggest putting the object diagonally on the bed so that the first layer of the supports are not in line with the object. This increases resistance to the plastic lifting off. Open the 3MF file in PrusaSlicer to see what I mean.
Notes on the source file
The source file is attached. It uses FreeCAD Link branch daily (downloads from https://github.com/realthunder/FreeCAD_assembly3). The file will not work on FreeCAD 0.19.
As an alternative for users working in other CAD software, a STEP file is also provided.